Antique Guns and Equipment
| Previous 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 Next | Page 12 of 49 |
.jpg)  |
Enfield, Pattern 1858, Native Sergeants, Smoothbore .650” Percussion Musket, Marked to the Excise & Salt Protectorate. Sn - 22426:14 This is nice, original Enfield Pattern 1858 Native Sergeants smoothbore Pattern 1858 .650” percussion musket. This was the first pattern 2 band smoothbore Indian pattern musket issued to Sergeants after the Indian Mutiny. These muskets were made for the Indian army after the Indian Mutiny where Indian soldiers were only given smooth bore weapons. This musket was the equivalent of the Enfield Sergeants rifle, only smoothbore and could only accept a socket bayonet. The musket is fitted with 2 barrel bands, with a barrel length of 33 inches with an overall length of 49 inches. The lockplate is stamped with the Queens crown over V.R and the Enfield inspection mark over 1870 (date) ENFIELD. The barrel is retained by a Baddley band to the middle, a standard barrel band to the fore end fitted with a sling swivel and has a nice patina finish. The musket has a smooth bore with a diameter of .650 inches and minor staining and residue due to age and service. The musket is fitted with a v notch rear sight, a block foresight, 2 sling swivels, the correct ram rod and a leather sling. The barrel has Enfield proof marks to the breech and is stamped N.S (Native States) next to it for issue to the Gurkha Regiments. The musket has a walnut stock with nice smooth woodwork with the correct brass furniture with only minor bumps and bruises due to service life. The left hand side of the butt is fitted with a brass roundel stamped EXCISE & SALT.D. 18. (Excise & Salt Protectorate, gun number 18). Salt was taxed by the British East India Company when it began to establish its rule over provinces in India. In 1835, special taxes were imposed on Indian salt to facilitate its import. In 1858, the Crown took over the administration of India from the Company and the taxes were not revoked. This musket was later issued for the enforcement of the taxes. See RB 45 on page 8, Catalogue of the Enfield Pattern Room, British Rifles, published by Her Majesty’s Stationary Office. The price includes UK delivery. NB As an antique obsolete calibre rifle and no licence is required to own this musket in the UK if retained as a part of a collection or display. Sn 22426:14 £795.00 |
 |
 |
British 1870 Dated, Enfield made Snider MK III .577 Calibre, 5 Grooved STEEL barrel Cavalry Carbine. Sn - 22426:13 This is an original British Enfield made, 1870 dated .577 Snider MK III Cavalry Carbine. The Snider action was introduced to British service in 1866 and muzzle loading Enfield carbines were converted to allow the use of the .577 calibre brass cartridge. They remained in use until the Martini Henry was introduced. This carbine made in 1870 at Enfield has a 21 ½ inch barrel and measures 37 ¼ inches overall. The carbines 5 groove barrels bore has just light staining consistent with age and well defined rifling and is stamped STEEL together with Enfield proof marks on its left hand side. The carbine is fitted with brass butt plate and trigger guard. The woodwork is undamaged with just bumps and bruises to be expected. The carbine has two rounded headed screws either side of the rear sight originally used to hold the leather rear sight protector. The action plate is marked with the Crown over a crowfoot inspection mark, 1870 (date) & ENFIELD. The hammer has the correct flat fronted hammer fitted. The top of the breech is stamped 'III' model designation. The hinged breech cover also has WD inspection marks and the correct knurled steel breech release catch. The carbine has a fixed foresight and an adjustable ladder rear sight. The carbines butt is stamped on the left hand side with 26 over B 8.79 & 1 over 1879. The top of the butt plate is stamped Y over Cs over 413 (Yeomanry, Cheshire, gun number 413). The carbine has white painted numbers behind the trigger guard 78 over 59 which will be an old museum or collection catalogue number. The action is crisp and works as it should. See section C, Snider arms, RB 86 and RB 88 on page 16 of the Catalogue of the Enfield Pattern Room, British Rifles, published by Her Majesty’s Stationary Office. The price includes UK delivery. NB As an antique obsolete calibre weapon no licence is required to own this item in the UK if retained as a part of a collection or display. Sn 22426:13 £975.00 |
|
.jpg) |
C1840 Scottish Alexander Martin Of Glasgow (Edinburgh Aberdeen & Stirling)Steel Frame 38 Bore Belt Pistol With Octagonal Barrel, Butt Trap, Belt Bar & Captive Ramrod. Sn 22362 - 22362 Alexander Martin (established 1778) was a Scottish gunmaker with various addresses in, Glasgow Edinburgh Aberdeen & Stirling. The Company traded until 1988 when it was taken over by John Dickson & Sons (see pages 281-282 of British Gunmakers Vol.2 by Brown). This is a nice steel framed percussion belt pistol by Alex Martin Glasgow. It is 10” overall length with a 5” octagonal sighted steel barrel which has British black powder proofs. The barrel’s smoothbore has just staining & residue consistent with age. The top of the barrel is signed by the maker ‘Alex Martin Glasgow’. The action, Dolphin hammer & trigger guard have foliate engraved decoration. It has a steel belt bar butt plate with hinged trap and captive steel ram rod. The action works crisply. The Walnut grip with fine chequering is excellent & undamaged. The back of the grip is inlaid with void white metal escutcheon. The price includes UK delivery. NB As an antique percussion pistol no licence is required to own this item in the UK if retained as a part of a collection or display. Sn 22362 (drawers office) £675.00 |
|
 |
**MASSIVE**ORNATE**C1790 Indian North West Frontier Match Lock 22 Bore Musket Wrapped With Plates & Foliate Formations Of Mother Of Pearl & Ram Rod. Sn 22407 - 22407 The matchlock was the first mechanism, or "lock" invented to facilitate the firing of a hand-held firearm. This design removed the need to lower by hand a lit match into the weapon's flash pan and made it possible to have both hands free to keep a firm grip on the weapon at the moment of firing and more importantly, to keep both eyes on the target. These weapons were prized by Native Warriors, and heavily personalised with ornate decoration. This is a C1790 Indian matchlock musket as used against British troops on the North West Frontier. It has a 43 ¼” long barrel (approx. 28 bore) and measures a massive 5’ 3” overall length. The barrel has a blade fore sight. The bore has typical heavy residue and staining consistent with age & use. It has a wood stock fully wrapped with hand crafted plates & foliate formations of Mother Of Pearl (just a few plates along the edges of the barrel absent but does not detract from the attractiveness of this gun). The barrel has white metal wire barrel bands and typical wood block butt (old stable secure chipping to one edge). The barrel is numbered ‘106’. It has a metal bar press trigger on the underside of the stock which correctly moves the 'match holder' arm to the metal powder pan and it has its iron ram rod. The metal has even patina to be expected of a native Indian weapon of its age. As an antique matchlock musket no licence is required to own this item in the UK if retained as part of a collection or display. NB Due to length delivery of this matchlock will be UK only & by arrangement at cost. Sn 22407 £395.00 |
|
.jpg) |
**ALL MATCHING NUMBERS**MINT BORE** Cased, C1870’s-1880’s American Eli Whitney, Whitneyville Armoury USA 1871 Patent Factory Nickel Plated Brass Framed .32 Rim Fire Obsolete Calibre 5 Shot Pocket Revolver With Octagonal Barrel & Accessories. Sn 22410 - 22410 This is a nice original nickel plated brass framed .32 Rim Fire 5 shot revolver made by Whitneyville Armoury USA (founded 1798 New Haven Connecticut USA by Eli Whitney). These American pocket revolvers were produced in the 1870's into the 1880's. The pistol has a 3 ¼” nickel plated steel octagonal barrel. The barrel’s bore is near mint, clean with crisp rifling. The top barrel flat is marked ‘Whitneyville Armory CT USA’ together with 'Pat May 23 1871'. The grip frame butt is stamped with serial number '6340B’. Matching numbers ‘340’ are stamped on the underside of the barrel, cylinder and cylinder spigot. The revolver has a sheathed trigger and the pistol's single action firing mechanism works as it should. The cylinder is quickly removed for speed loading with a preloaded cylinder by pressing a small button on the underside of its frame and removing its cylinder spigot which doubles as a clearing rod. The smooth walnut grips are excellent and undamaged. The pistol is contained in its associated fitted wood case lined with felt. The case has compartments to fit the pistol and accessories which consist of a white metal oil container with screw top lid and integral oil applicator tool, a small wire cleaning brush and steel cleaning rod. The case has a hinged lid and brass push button clasp fastener which works correctly. The inside of the lid has a paper trade label Frederick J. Smith & Co Birmingham manufacturer of guns. The top of the lid has a brass plaque inlaid which is marked ‘No.194 W.H. Harling London’ above indistinct struck out mark. The price includes UK delivery. NB As an antique obsolete calibre rim fire revolver no licence is required to own this item in the UK if retained as a part of a collection or display. Sn 22410 £675.00 |
|
 |
Victorian, C1840’s British WD Swinburn Birmingham Military Contract .650 Carbine Calibre Percussion Pistol with Captive Steel Ram Rod & Brass Furniture. Sn 21977:6. - 21977:6 C. P. Swinburn was a gunmaker located at 16-17 Russell Street in Birmingham, England, beginning in the 1840s. This is a very good British WD Light Dragoon Cavalry pistol by Swinburn of Birmingham most likely made under a British WD contract. It is 14” overall length with an 8” sighted blued barrel. The barrel has British ordnance inspection marks. The barrel’s smooth bore is clean. The original Walnut stock is a nice deep brown with regulation brass furniture & has just the bumps & bruises to be expected with age and service use. The wood is impressed ‘Swinburn’ and with Birmingham roundel. It has its original captive steel ram rod. The brass butt plate is holed for lanyard ring. The action plate is marked ‘Birmingham' and has Crown above WD arrow indicating made for the British WD. The action functions crisply. As an antique percussion pistol no licence is required to own this item in the UK if retained as part of a display or collection. The price includes UK delivery. Sn 21977:6. £975.00 |
|
 |
Quality Maker, Victorian C1850 W. Greener Birmingham .600” Bore Muzzle Loading Sporting / Hunting Rifle with Octagonal Barrel. Sn 16883. - 16883 The famous W.W. (William Wellington) Greener English sporting shotgun and rifle manufacturer was established in 1829 and is still in business, with a fifth generation Greener serving on its board of directors. He produced weapons under the names W. Greener & W.W. Greener. In the mid 1800’s Greener was producing firearms at the St Mary’s Works Birmingham and had Royal appointments with the British Monarchy. This is a sporting rifle by W.Greener. It has an undamaged Walnut stock. The top pf the wrist is inlaid with void shield shaped brass escutcheon. It has a 28” brown wash octagonal barrel. The bore has staining consistent with age and crisp rifling. The rifle measures 45” overall. The action has foliated scrollwork decoration and is crisply marked ‘W. Greener’. The rifle has its original steel ramrod, heavy Dolphin hammer, small brass blade fore sight & brass ‘v’ notch plate rear sight. It has a steel butt plate with extended tang and hinged trap, trigger guard with extended tang and acanthus bud finial all decorated with foliate scroll work. The fore end block is steel, and the weapon is fitted with sling swivels. The weapon's loading and firing actions work as they should. The price for this rifle by a prestigious maker includes UK delivery. NB As an antique muzzle loading percussion weapon no licence is required to own this item in the UK if retained as part of a collection or display. Sn 16883. £1,195.00 |
|
.jpg) |
American Remington Model 4 .32 Rimfire Obsolete Calibre Rifle. Sn - 22406 This is an American Remington rolling block model 4 rifle in .32 rimfire. The rifle has a 26 inch octagonal barrel and measures 40 inches overall. The rifle is in excellent condition. The barrel having a nice smooth finish with a natural patina finish. The rifle is an early manufactured one and carries the serial number 34003 (dating the gun to 1898). The barrel is stamped on the top REMINGTON ARMS CO.ILION.N.Y. the receiver has a nice smooth finish and is stamped on the left hand side PATENTS MAY 3 1864 NOV 3 DEC24 DEC3 1872 DEPT 4 1873. The rifle is fitted with a walnut stock with a steel butt plate and a 10 ½ inch long forend with a beavertail front. The rifle is fitted with an adjustable buckhorn rear sight. The foresight is a hinged globe ring foresight with an integral post and post which swivels as it should. The rifle has an excellent rifled barrel with only minor staining with use and age. The weapon’s loading, cocking and firing actions work crisply. As an obsolete calibre antique firearm, no licence is required to own this item in the UK if retained as part of a collection or display. Sn 22406 £975.00 |
|
 |
**RARE**, Early, 1870 Production, American Model 1866 Winchester (.44 Henry Rifle) Yellow Boy Rifle. Sn - 22417 This is a rare, early production of an American Winchester.44 rimfire Henry yellow boy octagonal barrelled rifle made in 1870. The rifles serial number is 37278 which dates its manufacture to early 1870. The Henry rifle is encountered in three barrel lengths from 20 inches for the carbine, 24 inches for the rifle and 27 inches for the musket. The rifle has a 24 ¾ inch octagonal barrel and measures 43 3/2 inches in length. The rifle has a brass capped wooden forend 10 ½ inches long and is fitted with a full length tube magazine which originally held 17 rounds of .44 Henry rimfire ammunition. The top of the barrel is stamped WINCHESTER REPEATING ARMS NEW HAVEN CT KING'S IMPROVEDMENT PATENTED MARCH 29 1866 OCTOBER 16 1860. The musket has an excellent rifled barrel with a shiny bore. The rifle has a brass foresight and a 2 position flip rearsight. The brass receiver is in excellent smooth condition with a smooth loading plate. The rifle is fitted with a brass butt plate with a butt trap. The woodwork is in good condition with the usual knocks and bumps with use. The weapon’s loading, cocking and firing actions work crisply. As an obsolete calibre antique firearm, no licence is required to own this item in the UK if retained as part of a collection or display. Sn 22417 £6,750.00 |
|
 |
**MINT BORE** American Civil War Era U.S. Army Marked Springfield Model 1863 .50-70 Centre Fire Obsolete Calibre Allin Conversion, (Second Pattern) 3 Band Rifle Converted Post Civil War for U.S. Military Issue In 1866 To Breech Loading Trap Door. Sn - 22419 This is an excellent original Springfield, 1864 dated, Model 1863 ‘Trap Door’ Allin Conversion, (Second Pattern) .50-70 Calibre 3 band service rifle converted to a Trap Door in 1866 for U.S. military issue. These rifles were originally American Civil War muzzle loading Pattern 1963 Springfield rifles with the .58 barrels being converted to .50 calibre by inserting a sleeve in the original barrel and boring it to .50 calibre. The top of the breech was cut open and an upward opening hinged breech block fitted which was secured to the barrel by two screws. The gun has all original wood stock and the metal work is clean with some re-finishing. It measures 56” overall with a 39 ½” round steel barrel. The rifled bore is in a bright and mint condition with three groove rifleing. The weapon is fitted with block and blade fore sight, flip up leaf rear sight. The rifle also has a heavy military hammer, steel butt plate, sling swivels, brass fore end block and steel ram rod. The action plate is marked with the American Eagle and 'U.S. Springfield' together with ‘1864’ (original manufacture date). The trap door is stamped with Eagle’s head army acceptance mark and ‘1866’ (date) indicating the date that this rifle was converted to trap door. The front of the breech is stamped with the number 10. The underneath of the breach block is stamped with the letter L. ,3 iron driving bands stamped with the U inspectors mark. The butt plate tang is stamped ‘U.S.’ (Army) above the screw. The metalwork and woodwork is in excellent condition. The weapon’s loading, cocking and firing actions work crisply. The price includes UK delivery. As an obsolete calibre antique firearm no licence is required to own this item in the UK if retained as part of a collection or display. Sn 22419 £1,695.00 |
|
| Previous 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 Next | Page 12 of 49 |
(Page updated regularly)