Antique Guns and Equipment
| Previous 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 Next | Page 16 of 51 |
  |
British 1870 Dated, Enfield made Snider MK III .577 Calibre, 5 Grooved STEEL barrel Cavalry Carbine. Sn - 22426:13 This is an original British Enfield made, 1870 dated .577 Snider MK III Cavalry Carbine. The Snider action was introduced to British service in 1866 and muzzle loading Enfield carbines were converted to allow the use of the .577 calibre brass cartridge. They remained in use until the Martini Henry was introduced. This carbine made in 1870 at Enfield has a 21 ½ inch barrel and measures 37 ¼ inches overall. The carbines 5 groove barrels bore has just light staining consistent with age and well defined rifling and is stamped STEEL together with Enfield proof marks on its left hand side. The carbine is fitted with brass butt plate and trigger guard. The woodwork is undamaged with just bumps and bruises to be expected. The carbine has two rounded headed screws either side of the rear sight originally used to hold the leather rear sight protector. The action plate is marked with the Crown over a crowfoot inspection mark, 1870 (date) & ENFIELD. The hammer has the correct flat fronted hammer fitted. The top of the breech is stamped 'III' model designation. The hinged breech cover also has WD inspection marks and the correct knurled steel breech release catch. The carbine has a fixed foresight and an adjustable ladder rear sight. The carbines butt is stamped on the left hand side with 26 over B 8.79 & 1 over 1879. The top of the butt plate is stamped Y over Cs over 413 (Yeomanry, Cheshire, gun number 413). The carbine has white painted numbers behind the trigger guard 78 over 59 which will be an old museum or collection catalogue number. The action is crisp and works as it should. See section C, Snider arms, RB 86 and RB 88 on page 16 of the Catalogue of the Enfield Pattern Room, British Rifles, published by Her Majesty’s Stationary Office. The price includes UK delivery. NB As an antique obsolete calibre weapon no licence is required to own this item in the UK if retained as a part of a collection or display. Sn 22426:13 £975.00 |
 |
.jpg) |
C1840 Scottish Alexander Martin Of Glasgow (Edinburgh Aberdeen & Stirling)Steel Frame 38 Bore Belt Pistol With Octagonal Barrel, Butt Trap, Belt Bar & Captive Ramrod. Sn 22362 - 22362 Alexander Martin (established 1778) was a Scottish gunmaker with various addresses in, Glasgow Edinburgh Aberdeen & Stirling. The Company traded until 1988 when it was taken over by John Dickson & Sons (see pages 281-282 of British Gunmakers Vol.2 by Brown). This is a nice steel framed percussion belt pistol by Alex Martin Glasgow. It is 10” overall length with a 5” octagonal sighted steel barrel which has British black powder proofs. The barrel’s smoothbore has just staining & residue consistent with age. The top of the barrel is signed by the maker ‘Alex Martin Glasgow’. The action, Dolphin hammer & trigger guard have foliate engraved decoration. It has a steel belt bar butt plate with hinged trap and captive steel ram rod. The action works crisply. The Walnut grip with fine chequering is excellent & undamaged. The back of the grip is inlaid with void white metal escutcheon. The price includes UK delivery. NB As an antique percussion pistol no licence is required to own this item in the UK if retained as a part of a collection or display. Sn 22362 (drawers office) £675.00 |
|
 |
**MASSIVE**ORNATE**C1790 Indian North West Frontier Match Lock 22 Bore Musket Wrapped With Plates & Foliate Formations Of Mother Of Pearl & Ram Rod. Sn 22407 - 22407 The matchlock was the first mechanism, or "lock" invented to facilitate the firing of a hand-held firearm. This design removed the need to lower by hand a lit match into the weapon's flash pan and made it possible to have both hands free to keep a firm grip on the weapon at the moment of firing and more importantly, to keep both eyes on the target. These weapons were prized by Native Warriors, and heavily personalised with ornate decoration. This is a C1790 Indian matchlock musket as used against British troops on the North West Frontier. It has a 43 ¼” long barrel (approx. 28 bore) and measures a massive 5’ 3” overall length. The barrel has a blade fore sight. The bore has typical heavy residue and staining consistent with age & use. It has a wood stock fully wrapped with hand crafted plates & foliate formations of Mother Of Pearl (just a few plates along the edges of the barrel absent but does not detract from the attractiveness of this gun). The barrel has white metal wire barrel bands and typical wood block butt (old stable secure chipping to one edge). The barrel is numbered ‘106’. It has a metal bar press trigger on the underside of the stock which correctly moves the 'match holder' arm to the metal powder pan and it has its iron ram rod. The metal has even patina to be expected of a native Indian weapon of its age. As an antique matchlock musket no licence is required to own this item in the UK if retained as part of a collection or display. NB Due to length delivery of this matchlock will be UK only & by arrangement at cost. Sn 22407 £395.00 |
|
 |
Victorian, C1840’s British WD Swinburn Birmingham Military Contract .650 Carbine Calibre Percussion Pistol with Captive Steel Ram Rod & Brass Furniture. Sn 21977:6. - 21977:6 C. P. Swinburn was a gunmaker located at 16-17 Russell Street in Birmingham, England, beginning in the 1840s. This is a very good British WD Light Dragoon Cavalry pistol by Swinburn of Birmingham most likely made under a British WD contract. It is 14” overall length with an 8” sighted blued barrel. The barrel has British ordnance inspection marks. The barrel’s smooth bore is clean. The original Walnut stock is a nice deep brown with regulation brass furniture & has just the bumps & bruises to be expected with age and service use. The wood is impressed ‘Swinburn’ and with Birmingham roundel. It has its original captive steel ram rod. The brass butt plate is holed for lanyard ring. The action plate is marked ‘Birmingham' and has Crown above WD arrow indicating made for the British WD. The action functions crisply. As an antique percussion pistol no licence is required to own this item in the UK if retained as part of a display or collection. The price includes UK delivery. Sn 21977:6. £975.00 |
|
.jpg) |
RESERVED RESERVED American Remington Model 4 .32 Rimfire Obsolete Calibre Rifle. Sn - 22406 This is an American Remington rolling block model 4 rifle in .32 rimfire. The rifle has a 26 inch octagonal barrel and measures 40 inches overall. The rifle is in excellent condition. The barrel having a nice smooth finish with a natural patina finish. The rifle is an early manufactured one and carries the serial number 34003 (dating the gun to 1898). The barrel is stamped on the top REMINGTON ARMS CO.ILION.N.Y. the receiver has a nice smooth finish and is stamped on the left hand side PATENTS MAY 3 1864 NOV 3 DEC24 DEC3 1872 DEPT 4 1873. The rifle is fitted with a walnut stock with a steel butt plate and a 10 ½ inch long forend with a beavertail front. The rifle is fitted with an adjustable buckhorn rear sight. The foresight is a hinged globe ring foresight with an integral post and post which swivels as it should. The rifle has an excellent rifled barrel with only minor staining with use and age. The weapon’s loading, cocking and firing actions work crisply. As an obsolete calibre antique firearm, no licence is required to own this item in the UK if retained as part of a collection or display. Sn 22406 £975.00 |
|
 |
**RARE**, Early, 1870 Production, American Model 1866 Winchester (.44 Henry Rifle) Yellow Boy Rifle. Sn - 22417 This is a rare, early production of an American Winchester.44 rimfire Henry yellow boy octagonal barrelled rifle made in 1870. The rifles serial number is 37278 which dates its manufacture to early 1870. The Henry rifle is encountered in three barrel lengths from 20 inches for the carbine, 24 inches for the rifle and 27 inches for the musket. The rifle has a 24 ¾ inch octagonal barrel and measures 43 3/2 inches in length. The rifle has a brass capped wooden forend 10 ½ inches long and is fitted with a full length tube magazine which originally held 17 rounds of .44 Henry rimfire ammunition. The top of the barrel is stamped WINCHESTER REPEATING ARMS NEW HAVEN CT KING'S IMPROVEDMENT PATENTED MARCH 29 1866 OCTOBER 16 1860. The musket has an excellent rifled barrel with a shiny bore. The rifle has a brass foresight and a 2 position flip rearsight. The brass receiver is in excellent smooth condition with a smooth loading plate. The rifle is fitted with a brass butt plate with a butt trap. The woodwork is in good condition with the usual knocks and bumps with use. The weapon’s loading, cocking and firing actions work crisply. As an obsolete calibre antique firearm, no licence is required to own this item in the UK if retained as part of a collection or display. Sn 22417 £6,750.00 |
|
 |
British, Martini Henry MK II, 1888 Dated, Rifle .577x .450 Obsolete Centre Fire Calibre Service Rifle by B,S.A & M Co & P1876 Pattern Bayonet. Sn - 22335 The Martini Henry mark 1 rifle was approved for service on the 17th July 1874. This is a Martini Henry mark 2 rifle. The action is stamped on the right side Crown VR (Victoria Regina) B,S.A & M Co (Birmingham Small Arms & Metal Company) 1888 (manufacture date) II (Mark II). The rifle carries many military inspection and proof stamps including the action trigger, trigger guard, operating lever, butt plate and barrel bands. The top of the receiver is stamped S-X for the strengthened extractor fitted to aid extraction of the cartridge case. The wood furniture has minor bumps and bruises to be expected with age and service use. The rifle measures 49 ½” and the 33 ¼” steel barrel's bore is clean with crisp rifling. The metal work has many WD ordnance inspection marks (illustrated). The action works crisply and fittings retain much of its original blued finish. After British service when the British Arm adopted the .303 Lee Metford rifle, surplus Martini Henry rifles were supplied to the Gurkhas who themselves were unable to re arm quickly. Quantities of surplus British Martini Henry rifles were sent to them from 1894 including further batches sent between 1906 and 1909. The rifle is neatly stamped to the left hand side of the rear sight NS NEP Native Scouts, Nepal. The butt is stamped with a roundel BIRMINGHAM over a crowfoot WD roundel over stamped with a Fort William, Calcutta Roundel . The rifle comes complete with its as found 1876 Pattern Martini Henry rifle socket bayonet and scabbard. The bayonet is marked on the ricasso with a crowfoot over WD and various other stampings including . See section D, Martini arms, RB 93 - 96 on page 18 and 19 of the Catalogue of the Enfield Pattern Room, British Rifles, published by Her Majesty’s Stationary Office and chapters 2 to 4 together with the plate on page 49 in The Martini-Henry for Queen and Empire by Neil Aspinshaw and Guns of the Gurkhas, (The lost arsenal: pistols, rifles and machine guns of the Royal Nepalese Army, 1816 – 1945) by John Walter . The price includes UK delivery. NB As an antique obsolete calibre rifle and no licence is required to own this rifle in the UK if retained as a part of a collection or display. Sn 22335 £1,750.00 |
|
 |
*QUALITY**MAKER**C1800 English John Manton London, 14 Bore, Single Barrel Muzzle Loading, Flintlock Later Period Converted To Percussion Shotgun With 2 Stage Damascus Steel Barrel. Sn 21276 - 21276 The famous English gunsmiths John Manton (1752-1834) & Son, George Henry (1789-1854) worked at Dover Street Piccadilly London. Between C1833 to 1844 George Henry Manton went into partnership with the Gunsmith William Hudson. The partnership continued to trade under the name Manton & Son (see page 170 of British Gunmakers Vol 1 by Brown). This is an excellent muzzle loading shotgun by John Manton London made C1800 and later period converted to percussion. It has a 32 ½” 2 stage sighted Damascus steel barrel and measures 49” overall. The top of the barrel has a gold signature ‘---MANTON * LONDON---‘. The smooth bore has just staining consistent with age. The shotgun has its original walnut stock with steel butt plate. The wrist has quality chequering and the fore stock has a polished horn cap. It has a Dolphin hammer and a plain steel action plate faintly signed ‘Manton’, steel trigger guard with extended tang and Pineapple finial. There is no visible serial number on the trigger guard. The underside of the barrel has number ‘3471’ and English proofs (illustrated). It has a wood ramrod with brass end cap. The weapon cocks & dry fires crisply. The price for this quality antique shotgun by the famous maker Manton includes UK delivery. NB As an antique percussion shotgun no licence is required to own this item in the UK if retained as part of a collection or display. Sn 21276 £1,475.00 |
|
 |
1856 Dated, Tower, 2 Band .577 Calibre Artillery Carbine. Sn - 22349 This is a 2 Band .577 calibre artillery carbine made in 1856 made at the Tower. The action plate is stamped With Queens Crown over V.R TOWER and 1856 (date). The carbine is complete with its original brass furniture, with ramrod and is fitted with a bayonet bar which is stamped 111, the bayonets issue number. The carbine is complete with its ramp and ladder rear sight. The top of the brass butt plate is stamped KW 494 which is probably King William College established in 1668 in the Isle of Man. The carbines barrel has 3 groove rifling with staining and residue form service use. The length of the carbine is 40 inches and the 24 inch barrel carries Tower proof marks. The wood work is in good condition and carries the normal bumps and bruises from service use and is stamped on the right hand side of the butt with a crowfoot over WD and 2. The price for this carbine includes UK delivery. NB This is an antique obsolete calibre rifle, and no licence is required to own it in the UK if retained as a part of a collection or display. Sn 22349 £975.00 |
|
.jpg) |
**SOLD**4/9**British Martini Henry MK II, 1887 Dated, Rifle .577x .450 Obsolete Centre Fire Calibre Service Rifle, 1876 Pattern Bayonet & Scabbard. Sn - 22334 The Martini Henry mark 1 rifle was approved for service on the 17th July 1874. This is a Martini Henry mark 2 rifle, pattern 1876 bayonet and scabbard. The action is stamped on the right side Crown VR (Victoria Regina) A & M 1889 (manufacture date) II (Mark II). The action has the large cocking indicator and the barrel carries Royal Small Arms Factory Enfield proof marks. The butt is stamped on the right hand side with a R M Enfield roundel. The top of the receiver is stamped S-X for the strengthened extractor fitted to aid extraction of the cartridge case. The rifle measures 49 ½” and the 33 ¼” steel barrel's bore is clean with crisp rifling. The wood furniture has minor bumps and bruises to be expected with age and service use. The action works crisply. The rifle comes complete with its as found 1876 Pattern Martini Henry rifle socket bayonet and scabbard. The bayonet is marked on the ricasso with a crowfoot over WD 1/85 (January 1885 manufacture date) and various other stampings. The brass tipped leather scabbard is stamped on the locket with a crowfoot over WD and a crown over (9 (Enfield). The chape is stamped with a crowfoot over WD. After British service when the British Arm adopted the .303 Lee Metford rifle, surplus Martini Henry rifles were supplied to the Gurkhas who themselves were unable to re arm quickly. Quantities of surplus British Martini Henry rifles were sent to them from 1894 including further batches sent between 1906 and 1909. The rifle is neatly stamped to the left hand side of the rear sight NS NEP Native Scouts, Nepal. See section D, Martini arms, RB 93 - 96 on page 18 and 19 of the Catalogue of the Enfield Pattern Room, British Rifles, published by Her Majesty’s Stationary Office and chapters 2 to 4 together with the plate on page 49 in The Martini-Henry for Queen and Empire by Neil Aspinshaw and Guns of the Gurkhas, (The lost arsenal: pistols, rifles and machine guns of the Royal Nepalese Army, 1816 – 1945) by John Walter . The price includes UK delivery. NB As an antique obsolete calibre rifle and no licence is required to own this rifle in the UK if retained as a part of a collection or display. Sn 22334 £0.00 |
|
| Previous 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 Next | Page 16 of 51 |
(Page updated regularly)