Bayonets
| Previous 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 Next | Page 9 of 64 |
.jpg)  |
German Mauser M84/98 2nd Model Bayonet by Richard Abr. Herder, Solingen and Scabbard with Leather Frog. 22184:1. - 22184:1 The M84/98 German bayonet 2nd model (The first pattern of S84/98 or M1884/98 bayonet was the 1871/1884 bayonet adapted so it could be used on the Gewehr 98. This was replaced in service by the 1898/05 bayonet. However, during World War I the S84/98 began to be produced again under the designation S84/98 II. The German Imperial Army used this bayonet in World War I as a way of conserving scarce resources The S84/98 III was production of the S84/98 bayonet during the late Weimar period and during the time of Nazi Germany. The hilt has clean wooden grips held to the tang with two screw bolts. The pommel has a mortise slot and locking bolt which secures it to the rifle nose cap The crossguard has no quillon or muzzle ring. The single edged spear point blade has a fuller on each side for about 180 mm. The riccasso has ‘clc 44’ (indicates production by Richard Abr. Herder, Solingen) ‘D2853’ to either side. The scabbard is metal with waffenampt stamp and leather frog. See page 128 No 283 of Watts & White for reference. A very good example for the collector, the price includes UK delivery. 22184:1. (Box 2) £275.00 |
 |
.jpg) |
British MkI Enfield Pattern 1887 Martini Sword Bayonet with Buff Frog and Scabbard. 22100. - 22100 A 2nd pattern Enfield Martini rifle was produced and the records for the years 1887 & 1888 indicate that 23,569 second pattern bayonets were manufactured. The 2nd pattern Enfield Martini bayonets were modified and subsequently became the pattern 1887 Mark I sword bayonet. This was approved on 13th May 1887. Blade length; 18.312”, overall length; 23.625” (muzzle; 18mm). The blade is in good condition with staining consistent with its age. One side of the ricasso is marked ‘/87 crown over VR and the other ‘WD’ below Broad Arrow and ‘crown E over 58’. The spine has markings shown in the images, and the pommel is stamped ‘47’, see images. The fish scale grips are good and intact with a few minor use related marks. The leather scabbard is in good order with all stitching in place and is marked ‘44’ to the throat. The frog has the Broad Arrow and other markings as shown in the images. See pages 318/382 No 792 of The Bayonet Book by Watts & White for similar. The price includes UK delivery. 22100. (Box 3) £475.00 |
|
.jpg) |
British Pattern 1842 Socket Bayonet for Percussion Musket Manufactured by Roe, John & Son. BAYO 614. - BAYO 614 This tubular socket, slightly tapered to fore-end. Narrow rounded collar reinforce with distinctive rounded bridge at the rear. There is a cut-away groove in the collar which is designed to align with the firearm's foresight when the bayonet is attached. Simple right angled zigzag attachment slot. Blade form: triangular section, with broad flat face and deeply fullered sides. The very slightly arched blade tapers towards narrow down-turned tip. Faintly stamped with the manufacturers name and ’19’ below crown. Blade length; 42 ¼ cm (45 ½ cm overall) 4” socket. In good overall condition with an aged patina. The price includes UK delivery. BAYO 614. (BRITISH Socket Box) £295.00 |
|
 |
WW2 Pacific Theatre USMC M1 Garand Rifle Bayonet Period Converted To Fighting Knife With Period USN Ka-Bar Scabbard. Sn 22121 - 22121 This is an original, WW2 US M1 Garand, Springfield Rifle Knife Bayonet period converted to fighting knife most likely for use by the USMC in the Pacific theatre of war. The bayonet has a contemporarily re-bladed with a 7 ¼” fullered, fighting knife blackened steel blade. The field sharpened blade is razor sharp. The knife is 11 ¾” overall length. The knife retains its original Garand bayonet hilt with original undamaged wood scales, original pommel mortice and has a conversion replacement blackened, slotted steel cross guard. The knife has no maker or date marks. The knife is in its USN Ka-bar leather scabbard in which it was found. The leather scabbard is clean and undamaged. It has riveted and stitched seams, retaining strap with press stud fastener and belt loop. The front of the scabbard is impressed ‘USN’. The price includes UK delivery. Sn 22121 (American Knives & Bayonets Box) £375.00 |
|
.jpg) |
*Original Exceptional Condition* 07 Pattern Hook Quillon 1909 Dated Bayonet & 1st Patt Scabbard (Matching No’s) to Kings Royal Rifles. 22115. - 22115 This is an excellent 1st Type, hook quillon '07' sword bayonet by Enfield, complete with original 1st type scabbard. These bayonets were introduced in January 1908 (See page 392 No 818 of Watts & White for reference). This example was made in 1909, a year after production began. The sword bayonet has a 17" steel single edged blade which is stamped on the ricasso with the Kings crown 'ER' (Edward Rex) and '1907' (pattern) together with date '5 09' (May 1909) and 'EFD' (Enfield manufacturer). On the reverse it is stamped with inspection marks. The bayonet is fitted with its original 1st Type hook quillon cross guard which incorporates a muzzle ring marked to the throat ‘354’ and stamped to the leather ‘H.G.R’ 09 (Hepburn, Gale and Ross Ltd). The wood grips are undamaged secured with two screw bolts. The pommel is stamped 'KRR' (Kings Royal Rifles) (The King's Royal Rifle Corps was an infantry rifle regiment of the British Army that was originally raised in British North America as the Royal American Regiment during the phase of the Seven Years' War in North America known in the United States as 'The French and Indian War. The 1st Battalion landed at Rouen as part of the 6th Brigade in the 2nd Division in August 1914 for service on the Western Front. It saw action at the Battle of Mons in August 1914, the First Battle of the Marne and the First Battle of the Aisne in September 1914 and First Battle of Ypres in October 1914.) above ‘354’. It is complete with its original 1st Pattern leather scabbard with steel locket and internal chape. All the stitching and leather of the scabbard are intact. The price for this stunning Regiment marked 1st Type bayonet and 1st Pattern scabbard includes UK delivery. 22115. (Box 1) £1,200.00 |
|
.jpg) |
C1760 Revolutionary War British Dragoon Bayonet. BAYO 613. - BAYO 613 Bayonet for a circa 1760s British light dragoon carbine.( Dragoons were originally a class of mounted infantry, who used horses for mobility, but dismounted to fight on foot. From the early 17th century onward, dragoons were increasingly also employed as conventional cavalry and trained for combat with swords and firearms from horseback. While their use goes back to the late 16th century, dragoon regiments were established in most European armies during the 17th and early 18th centuries; they provided greater mobility than regular infantry but were far less expensive than cavalry. For reference see "The Socket Bayonet in the British Army" page 98. This piece is 18 ½ “overall, 14R43; blade, 3.9R43; socket and inside diameter of 26mm. Blade is marked with "C" which is a Smiths mark. The metal surfaces show stains, light scattered pitting and old patina. This piece shows slight variations of dimensions from the various bayonets shown on the pages 98 to 102 of the aforesaid reference. A less than common British military bayonet. The price includes UK delivery. BAYO 613. £375.00 |
|
.jpg) |
4" Brown Bess Bayonet with India Spring Catch. BAYO 612. - BAYO 612 The standard socket bayonet of the eighteenth century is the triangular bladed type, known by the name of its firearm as the Brown Bess, which was the premier British Army bayonet up to and indeed after 1842. Many were sent out to India after becoming obsolete for the British Army. This style of British bayonet is the subject of much speculation as to its designation and if it was ever officially issued. New research by David Harding on the history of the East India Company (EIC) has revealed that in the period 1771-72 the Board of Ordnance made a trial issue of some 600 bayonets with 'Springs' for muskets of Long Land Pattern. But they were never officially adopted. Blade length; 375mm, overall length; 490mm and 4” socket length. In good overall condition with age related staining. See pages 286 & 336 of Watts & White for reference. The price includes UK delivery. BAYO 612. (Box 1) £295.00 |
|
.jpg) |
*Rare* Prussian/Danish Model 1794 Socket Bayonet/Long Blade with Kyhl Lock Spring. BAYO 611. - BAYO 611 A Prussian Dreyse Socket bayonet with a unique locking spring designed by Johan Christian Wilken Kyhl (Danish). It was first introduced in 1794. The Kyhl spring catch was used on Danish bayonets from 1794-1860 and was also used by Norwegian and Prussian makers. The bayonet overall length is 27”, blade length is 21” and the muzzle ring is 24mm. In good condition, this original Danish Model 1794 socket bayonet features the distinctive Kyhl lock spring. The bayonet has original brown patina. It has a massive 21" blade. The shoulder is stamped ’22161’. A rare bayonet that will make a fine addition to a collection. The price includes UK delivery. BAYO 611. (Bucket) £295.00 |
|
.jpg) |
British Pattern 1842 Lovell’s Catch Socket Bayonet by Manufacturer S.Hill & Sons. BAYO 610. - BAYO 610 This is a nice, untouched example of a British Pattern 1842 Lovell’s Catch Socket Bayonet 1840s British carbine bayonet by S Hill & Son, having a Lovel's catch, socket 3", blade 13", MRD 21 mm. Although not adopted until late in 1844, the bayonet is referred to as the Pattern 1842 in most references and saw use with nearly all the Pattern 1842 muskets produced, as well with many of the earlier Pattern 1839 muskets that were upgraded to the Lovell Catch system. The British Pattern 1842 bayonets had nominally 17” long blades with 3” sockets and bore diameters of approximately 24mm. The sockets were mortised for top stud and had a simple 3-step “zigzag” mortise cut. These dimensions were essentially the same as the earlier Pattern 1839 Bayonet that had been used with the Hanoverian catch system. This example of a British Military Pattern 1842 Lovell Catch Socket Bayonet is in very good condition. The bayonet was produced by the famous English contractor S.Hills and Sons and is marked on the face of the blade. See page 359 of Watts & White for reference. The price includes UK delivery. BAYO 610. (British Box 1) £275.00 |
|
.jpg) |
C1936 Type 30 Japanese Bayonet Tokyo Variation A 11th Series and Scabbard. 22024. - 22024 This is a Japanese ‘Arisaka Type 30’ bayonet with hooked quillon and made by ‘Tokyo Kokura’ arsenal (The arsenal was established in 1916 as the ‘Kojura Arms Factory’ Kokura Heiki Seizojo as one of six arsenals under control of the Government: the others were the Tokyo Arsenal, Nizo Arsenal (Second Tokyo Arsenal), Nagoya Arsenal, Osaka Arsenal and the South Manchurian Arsenal). The Arsenal manufactured various machine guns, cannons and rifles. The blade measures 15 ½ “with fullers and is clearly marked to the ricasso with the four rings trademark of the ‘Kokura’ arsenal. The grips are wooden held by two screw bolts. The pommel is serial number marked ‘1168911’ which puts it to variation A- 11th series. The scabbard is a ball tipped metal version which has an aged patina. (see page 97-99 of Bayonets of Japan by R.C.Labar for reference). The price includes UK delivery. 22024. (Other countries Box 1) £245.00 |
|
| Previous 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 Next | Page 9 of 64 |
(Page updated regularly)