Bayonets - American
| Previous 1 2 3 4 5 Next | Page 2 of 5 |
.jpg)  |
American U.S. Model 1917 Polished Bayonet and Scabbard. BAYO 588. - BAYO 588 This is a WWII 1917 pattern bayonet with the WWII pattern scabbard of olive green plastic. Earlier models had the leather scabbards, but during the Second World War a further pattern was introduced of olive green plastic with a steel top mount incorporating a double hook and marked to the top locket with U.S. within a flaming grenade and M1917. The polished blade is in good condition and is marked 1917 over Remington (In 1940, the US Army became worried about its ammunition capacity and asked Remington to collaborate on a plan for national expansion. With the aid of DuPont, Remington built the Lake City Army Ammunition Plant (named Lake City Arsenal initially) and Denver Ordnance ammunition plants, and three more plants later on, including the Lowell Ordnance Plant. Though the plants belonged to the US government, Remington was asked to oversee their operation) within a circle on one side and an eagle with a flaming grenade over U.S. on the other. The wooden grips are held with two screws and are very good condition. See The Bayonet Book by ‘White & Watts’ item No 925, pages 412 & 435. The price includes UK delivery. BAYO 588. £245.00 |
 |
.jpg) |
U.S. 1943 Dated M1 Bayonet and Scabbard by Maker U.F.H. BAYO 566 - BAYO 566 This is a rare M1 bayonet and not a cut M1905 or M1942 blade. The grips are plastic and are held to the bayonet by one screw bolt. The fullers on the blade do not go down to the tip, stopping 2 ¾ inches from the tip. The blade is in very good order and is showing very minor signs of service wear. The bayonet is stamped on the ricasso with U.F.H. (Union Fork and Hoe) U.S. and has the Flaming Grenade. The bayonet is carried in its correct composite olive green plastic scabbard with a steel mouthpiece on which is stamped the U.S. flaming grenade. The bayonet is virtually identical to the one shown as in item 930 on pages 412 and 437 in The Bayonet Book by White and Watts. The price includes UK delivery. BAYO 566. £295.00 |
|
.jpg) |
**VERY RARE**American Civil War Era Confederate Army & Navy ‘Bowie Bayonet’ With Chequered Polished Horn Scales, Etched Blade, Cross Guard With 14mm Diameter Muzzle Ring Cross Guard & Scabbard. Sn 20297 - 20297 Popularly known to the collecting world as the Bowie Bayonet these impressive bayonets were popular with both Union & Confederate troops in both the Army & Navy. Union examples were marked ‘U.S’. Many Confederate Bowie Bayonets were made by the British Sheffield trade when the outbreak of hostilities in 1861 sparked a boom for foreign cutlery manufacturers. Sheffield cutlers reaped handsome returns exporting substantial quantities to the Confederacy. See pages 179, 183 & 193 of The Bowie Knife by Flayderman where examples of Bowie Bayonets are illustrated (we cannot find an exact match for ours which has the quality and weight of a Sheffield made piece. The bayonet charge which can be seen in image 1 taken from a contemporary war artist’s impression illustrates why these impressive weapons would have been useful in combat). Our example, no doubt a Confederate weapon has a 10” long deep swept Bowie blade (15” overall). The blade is undamaged and has just staining consistent with age. One side of the blade has etched scrollwork decoration which is rubbed in areas. There are no visible maker or date marks. It has a steel cross guard with 14mm diameter muzzle ring (we are uncertain which rifle this bayonet was made for). Its polished horn ergonomic scales are undamaged with no chips or cracks and have chequered panels. Each grip is secured by 5 pins. One scale has a sprung knurled steel release button which works as it should. The Bowie bayonet is contained in its original leather scabbard which has a brass throat mount with frog locket and brass chape. The leather has some surface scuffing consistent with age and service use but all leather and stitching are clean & intact. The price for this very rare Bowie Bayonet includes UK delivery. Sn 20297 £1,895.00 |
|
.jpg) |
U.S M4 WWII Bayonet and Scabbard. 20155. - 20155 This is a very nice WWII M4 bayonet (The M4 bayonet was introduced in 1944 for use with the M1 carbine. The M4 bayonet, like the M3 fighting knife that preceded it, was designed for rapid production using a minimum of strategic metals and machine processes; it used a relatively narrow 6.75-inch bayonet-style spear-point blade with a sharpened 3.5-inch secondary edge) it is marked to the crossguard with ‘U.S. M4 AERIAL’ (Aerial Cutlery Manufacturing Co) The blade retains most of its original finish and the grip has the usual leather washers, which are firm and tight. The pommel carries a number 134. The scabbard is the early ‘U.S. M8’ made by ‘B.M.Co.’ (Beckwith Manufacturing Co). A nice late WWII M4 & M8 scabbard combination. The price includes UK delivery. 20155. £395.00 |
|
 |
**MINT** U.S. Army E.O.D. (Explosive Ordnance Disposal) Technician’s M11 Lan-Cay Multi Purpose Fighting Knife Bayonet System With Lan- Cay Scabbard & US Army Lan-Cay Carrollton Ky M11 EOD Webbing Belt Hanger / Pouch Assembly Pac. Sn 20098 - 20098 This is the Lan-Cay multi purpose knife bayonet system designed in co-operation with the 52nd Ordnance Group (E.O.D.) to serve as a multi purpose knife bayonet and carrier for tools. The M11 knife bayonet is in near mint condition. The 7 ¼” blued blade is stamped EOD M11 Lan-Cay. The blade is holed to fit the wire cutting attachment which is present on the scabbard. The scabbard is similar to those issued with M9 Bayonets and is fitted with webbing belt hanger assembly and correct pockets to the front for tool carrying. The pockets are empty apart from a cord with adjustable toggle. The carrier is marked ‘US M11 EOD Tool Pac Lan-Cay Carrolllton Ky’. A desirable EOD knife bayonet system still in use with the U.S. Armed Forces. The price includes UK delivery. Sn 20098 £450.00 |
|
.jpg) |
WW2 US Army UFH (Union Fork and Hoe Company) M1 Short Bayonet & Scabbard For The M1 Garand Rifle. Sn 20101 - 20101 An excellent, original M1 Garand rifle bayonet with original 10” parkerised blade, not a cut down ‘M1905’ or ‘M1942’. The fullers do not run through to the tip as with the cut down bayonets, but stop 2 ¾ “from the tip ( see ‘An Illustrated History of Bayonets’ by Martin.J.Brayley, pages 231-241). The bayonet has a push button release which is situated near to the cross guard with muzzle ring. The ricasso is stamped by the maker ‘UFH’ (Union Fork and Hoe Company), ‘US’ (army acceptance mark) & Frankford arsenal ‘ignited grenade’ mark. The scabbard is again original and not a cut down version. It has its original plastic scabbard with steel throat mount and chape holed for thigh cord. The throat mount has the correct double hook arrangement. The price includes UK delivery. Sn 20101 £295.00 |
|
 |
WW2 US Army UFH (Union Fork and Hoe Company) M1942 Bayonet & M3 Scabbard For The M1 Garand Rifle. Sn 20159 - 20159 An excellent, original full length WW2 US Army M1942 Bayonet & Scabbard by UFH for the M1 Garand Rifle. The M1942 Bayonet is a modernised version of the M1905 bayonet and fits the Garand rifle as well as the M1903 Springfield rifle. It is identical in configuration to the earlier model but has ribbed plastic grips. The scabbard developed by the Beckwith manufacturing Company was designated the M3 and was made of olive green plastic, the top steel mount incorporated a double hook arrangement (see page 412 & page 416 of The Bayonet Book by White & Watts). The bayonet has a push button release which is situated near to the cross guard with muzzle ring. It has a 45cm long blade with fullers. The ricasso is stamped by the maker ‘UFH’, ‘1942’ model detail, ‘US’ (army acceptance mark) & Frankford arsenal ‘ignited grenade’ mark. The scabbard is olive green plastic in excellent condition, correctly holed at the tip for cord and has the correct steel throat mount with steel bar double hook. The throat mount has ‘US’ (army acceptance mark) & Frankford arsenal ‘ignited grenade’ mark. The price includes UK delivery. Sn 20159 £475.00 |
|
 |
WW1 1918 U.S Army Springfield Arsenal (SA) M1905 Bayonet & M3 Scabbard. Sn 20103 - 20103 The M1905 bayonet was produced from 1906 to 1922 by Springfield Armoury and Rock Island Arsenal (RIA). The blade and handle frame were forged as a single piece with a wide, square-shaped fuller. The ribbed hand grips were made of walnut and attached to the handle with a screw. The screw also held the catch mechanism, manipulated with a button under the crossguard, that was used to fix the bayonet to the rifle's bayonet lug. In mid-1941, it was decided to restart production of the M1905 bayonet. To simplify production, these later bayonets had handles with black or dark red ribbed grips, made of phenol formaldehyde resin, the earliest type of synthetic plastic. Production was scheduled to begin in January 1942, but the first bayonets were not delivered until April, with quantity deliveries not beginning until the summer of 1942. Despite initial setbacks, the M1905 bayonet was manufactured in sufficient numbers to keep up with the widespread introduction of the new M1 Garand rifle in 1942. By the end of 1942, all six manufacturers had changed the shape of their fullers to a narrower, round-bottomed shape. The later version of the M1905 bayonet with plastic grips is sometimes referred to as the "M1942" by collectors and historians. This is a late production WW1 1918 dated M1905 Bayonet made by ‘SA’ (see White & Watts ‘The Bayonet Book’ item 922 pages 411 and 434). The 45 cm long steel blade with fullers is stamped by the maker ‘SA’ above Frankford arsenal ignited grenade mark and date 1918. The reverse has ‘US’ army acceptance mark and number ‘778039’ . The correct, walnut grips are correctly held by a single screw. The wood has knocks, bumps and bruises to be expected. The bayonet has the correct press button at the cross guard which releases the locking catch on the rifle and also holds the bayonet firmly in the scabbard. The scabbard is the later M3 plastic variant with ignited grenade ‘US’ (army) mark on the throat mount. The throat has the correct double hook belt bar. The price includes U.K. delivery. Sn 20103 £475.00 |
|
.jpg) |
1908 U.S Army Springfield Arsenal (SA) M1905 Bayonet & Early Pattern Leather & Canvas Covered Scabbard. Sn 20102 - 20102 The M1905 bayonet was produced from 1906 to 1922 by Springfield Armoury and Rock Island Arsenal (RIA). The blade and handle frame were forged as a single piece with a wide, square-shaped fuller. The ribbed hand grips were made of walnut and attached to the handle with a screw. The screw also held the catch mechanism, manipulated with a button under the crossguard, that was used to fix the bayonet to the rifle's bayonet lug. In mid-1941, it was decided to restart production of the M1905 bayonet. To simplify production, these later bayonets had handles with black or dark red ribbed grips, made of phenol formaldehyde resin, the earliest type of synthetic plastic. Production was scheduled to begin in January 1942, but the first bayonets were not delivered until April, with quantity deliveries not beginning until the summer of 1942. Despite initial setbacks, the M1905 bayonet was manufactured in sufficient numbers to keep up with the widespread introduction of the new M1 Garand rifle in 1942. By the end of 1942, all six manufacturers had changed the shape of their fullers to a narrower, round-bottomed shape. The later version of the M1905 bayonet with plastic grips is sometimes referred to as the "M1942" by collectors and historians. This is an excellent 1908 dated M1905 Bayonet made by ‘SA’ (see White & Watts ‘The Bayonet Book’ item 921 pages 411 and 434). The 45 cm long blued steel blade with fullers is stamped by the maker ‘SA’ above Frankford arsenal ignited grenade mark and date 1908. The reverse has ‘US’ army acceptance mark and number ‘347740’ . The correct, walnut grips are ribbed & correctly held by a single screw. The wood has knocks, bumps and bruises to be expected. The bayonet has the correct press button at the cross guard which releases the locking catch on the rifle and also holds the bayonet firmly in the scabbard. The scabbard in excellent order is the early pattern of heavy leather and canvas sewn over a wooden frame. The throat has the correct brass belt bar. The scabbard has a brown leather chape. The price includes U.K. delivery. Sn 20102 £525.00 |
|
 |
Scarce U.S. 1943 Dated M3 Bayonet By Camillus, Complete With Its M6 1943 Dated Scabbard By MILSCO. Sn - 20162 This is a superb and original American 1943 dated M3 bayonet with its original M6 scabbard. This M3 fighting knife was made by Camilus and is dated 1943 which is also marked on the blade. These blade marked knives were only made for approximately 6 months before the markings were moved to the crossguard. The stamped markings on the blade were thought to weaken the blades in service. The M3 bayonet is contained in its original M6 leather scabbard made by MILSCO and is also dated 1943. The bayonets pommel is stamped with the flaming grenade stamp. The bayonet has the usual leather washer grip which is tight with no movement. This bayonet is a nice complete and rare to find combination of a blade marked and dated M3 knife bayonet in its rare matching M6 leather scabbard. See M.H.Cole, U.S Military Knives.. The price includes UK delivery. Sn 20162 £895.00 |
|
| Previous 1 2 3 4 5 Next | Page 2 of 5 |
(Page updated regularly)